单项选择题
The network setup for this trouble ticket is shown in Figure 3.
Trouble Ticket Statement
DSW1 and R4 cannot ping R2’s loopback or R2’s s0/0/0/0.12 IPv6 address. Initial troubleshooting shows and R2 is not an OSPFv3 neighbor on R3.
Configurationon R2
ipv6 unicast-routing!
ipv6 router ospf 6
router-id 2.2.2.2!
interface s0/0/0/0.23
ipv6 address 2026：：1：1/122
ConfigurationR3
ipv6 unicast-routing!
ipv6 router ospf 6
router-id 3.3.3.3!
interface s0/0/0/0.23
ipv6 address 2026：：1：2/122
ipv6 ospf 6 area 0
Figure 3
The Fault Condition is related to which technology？（）
A.IPv6 Addressing
B.Route Redistribution
C.OSPFv3
D.RIPng
相关考题
-
单项选择题
The network setup for this trouble ticket is shown in Figure 3. Trouble Ticket Statement DSW1 and R4 cannot ping R2’s loopback or R2’s s0/0/0/0.12 IPv6 address. Initial troubleshooting showsand R2 is not an OSPFv3 neighbor on R3. Configurationon R2 ipv6 unicast-routing! ipv6 router ospf 6 router-id 2.2.2.2! interface s0/0/0/0.23 ipv6 address 2026：：1：1/122 ConfigurationR3 ipv6 unicast-routing! ipv6 router ospf 6 router-id 3.3.3.3! interface s0/0/0/0.23 ipv6 address 2026：：1：2/122 ipv6 ospf 6 area 0 Figure 3 On Which device is the fault condition located?（）
A.DSW1
B.DSW2
C.R2
D.R3 -
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the Fa0/1interface of R4 but not the s0/0/0/0.34 interface. Configurationon DSW1 router eigrp 10 network 10.1.4.4 0.0.0.0 network 10.2.1.1 0.0.0.0 network 10.2.4.13 0.0.0.0 no auto-summary Configurationon DSW2 router eigrp 10 network 10.1.4.8 0.0.0.0 network 10.2.2.1 0.0.0.0 network 10.2.4.14 0.0.0.0 no auto-summary Configurationon R4 router eigrp 10 network 10.1.4.5 0.0.0.0 no auto-summary redistribute ospf 1 metric 100 10 255 1 1500 route-map EIGRP_to_OSPF! router ospf 1 network 10.1.1.8 0.0.0.0 area 34 redistribute eigrp 10 subnets! route-map EIGRP→OSPF match ip address 1! access-list 1 permit 10.0.0.0 0.255.255.255 access-list 1 permit 209.0.0.0 0.255.255.255 On Which device is the fault condition located？（）
A.DSW1
B.DSW2
C.Client 1
D.R4 -
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the Fa0/1interface of R4 but not the s0/0/0/0.34 interface. Configurationon DSW1 router eigrp 10 network 10.1.4.4 0.0.0.0 network 10.2.1.1 0.0.0.0 network 10.2.4.13 0.0.0.0 no auto-summary Configurationon DSW2 router eigrp 10 network 10.1.4.8 0.0.0.0 network 10.2.2.1 0.0.0.0 network 10.2.4.14 0.0.0.0 no auto-summary Configurationon R4 router eigrp 10 network 10.1.4.5 0.0.0.0 no auto-summary redistribute ospf 1 metric 100 10 255 1 1500 route-map EIGRP_to_OSPF ! router ospf 1 network 10.1.1.8 0.0.0.0 area 34 redistribute eigrp 10 subnets! route-map EIGRP→OSPF match ip address 1! access-list 1 permit 10.0.0.0 0.255.255.255 access-list 1 permit 209.0.0.0 0.255.255.255 What is the solution of the fault condition？（）
A.Remove the redistribute command from OSPF process on R4
B.Change the route-map name in the redistribute command under OSPF process to EIGRP→OSPF on R4
C.Change EIGRP AS to 1 on R4
D.Advertise 10.1.1.8/30 network in EIGRP on R4
